Reatta Owners Journal

The PVC valve is located on the backside of the intake manifold on the passenger side. See photo below.

Be sure you have a new grommet on hand before changing the valve.

Here's the part numbers for the grommets and the PVC valve:

01381487 grommet - .46 ( round flat washer type - bottom )
25536368 grommet - .46 ( small rubber hose type - top )
25098058 PVC valve -.42 ( AC DELCO )

Watch the grommet the PCV valve sits in. They tend to break and fall into intake when trying to remove the valve.

pvc_valve_location.jpg

Thanks to Mc_Reatta, member of the Reatta forums, for this information.


 

ATTENTION: Use any information you find on Reatta Owners Journal at your own risk. Carefully read and agree to the DISCLAIMER AND FAIR USE NOTICE before using any information found on this website.