Reatta Owners Journal

The rear cradle insulators are no longer available for the Buick Reatta.

The following information my help someone who needs the rear insulators.

fordrodsteven, member of the forums wrote:
"I ordered and used P/N 3538757 (insulator) from GM Parts Direct. They were less than $35.00. They are listed for 1999 Caddy Deville but they are an exact fit to the Reatta. Before that I ordered the Reatta P/N and I got the metal parts but no rubber insulator material. This P/N 3538757 comes complete ready to bolt in. It has the metal component and the rubber insulator material is bonded to the upper portion. If I remember correctly I used the same bolts as used on the front cradle bushings. P/N 11517635. I think I had to order the lower metal component also P/N 25678602. It's called the "spring insulator""

GM part # 3538757 is part #8 in the illustration below. The illustration is for the rear of a 1992-1997 Cadillac Edoroado but several other Cadillacs use the same part.

rear cradle bushing


 

 

ATTENTION: Use any information you find on Reatta Owners Journal at your own risk. Carefully read and agree to the DISCLAIMER AND FAIR USE NOTICE before using any information found on this website.