It is possible for the battery cable connection to be loose even thought the battery cable bolt is tight.

---

If you can move the cable after you tighten the bolt you need to do the following repair.

1. Remove the battery cable.
2. Using a small screw driver, carefully pry the bolt out of the rubber cover of the battery cable.
3. Install a flat washer (3/8" hole) under the head of the bolt and reinstall the bolt in the battery cable.

Use a brass or copper flat washer if possible to help prevent corrosion.

Reconnect the battery cable and tighten the bolt. Do not over tighten the bolt holding the cable to the battery. Damage to the battery could result!

---

Thanks to wws944, member of the Reatta forums for this information.

---