The Problem: The buttons on the Instrument Panel Cluster [IPC] have stopped working.

These buttons are affected:

  • 'Test'
  • 'Metric'
  • 'Fuel Gauge' - the one that shows the 1/4 tank range
  • 'Trip Reset'

If you check you should also find that the cruise control has stopped working as well.

The Solution: Replace the 'Cruise Control Fuse, fuse #8, in the center console hidden fuse block.

Information about the center console hidden fuse block can be found here.

This information is not very well documented in the Field Service Manual.

Thanks to D-a-n-i-e-l, member of the AACA Reatta forum, for this information.

ATTENTION: Any advice or information found on this website should not be considered 100% accurate. Use any information you find here at your own risk. Carefully read and agree to the DISCLAIMER AND FAIR USE NOTICE before using any information found on this website.