rons_reatta-1 machiner55-1 89maui-1 zolanB-1 Daves89-1
back button

The Buick Reatta lug nuts should be torqued to 100 ft-lbs using a calibrated torque wrench (if available). They should be torqued evenly in a crisscross tightening sequence, gradually increasing the torque until full torque is reached. A light coat of oil on the threads is desirable to insure proper torque.

Always start the lug nut on the lug bolt by hand for a few turns to prevent cross threading.

Help Support Reatta Owners Journal
Click here to make a donation. Your donation is much appreciated.
NOTICE: Any advice or information found on this website should not be considered 100% accurate. Use any information you find here at your own risk. Carefully read the DISCLAIMER AND FAIR USE NOTICE before using any information found on this website.